Staff Login | Sitemap
Home Ransburg Fluid Handling Management Direct Drive Pump (DDP)

Direct Drive Pump (DDP)

The Ransburg DDP, Direct Drive Pump, provides an extremely accurate, repeatable means of supplying coating material to the applicator. Compatible with a wide variety of solvent and waterborne coating materials, the DDP offers a broad range of options to meet your system’s operating needs.

The DDP’s AC-motor drives the system’s gear pump via an isolated shaft. The positive displacement of the gear pump delivers a given amount of material based on the speed (rpm) of the motor. Digital controls provide variance in speed for a precise, consistent finish. The gear pump can be gravity or suction fed, if wetted/primed, and the output has the ability to connect either directly to the applicator or routed through a three-way valve, if continuous circulation is required.

Built with an explosion proof motor, the DDP system can be conveniently located anywhere within the spray area. The operator regulates the flow rate as well as the start/stop function either locally or at a remote station. These user-friendly controls deliver convenience as well as an accurate, even finish.
Power Input: Controller – 230 VAC (+/-20%), 50/60 Hertz. Requires 20 amp fuse disconnect
Motor Speed: 57 rpm (min), 1725 rpm (max.)
Pump Speed: 30 – 900 rpm (dependent on pump type)
Fluid Delivery: 20 – 900 cc/min (dependent on pump)
Motor: UL listed, CSA certified, explosion proof Class I groups C&D, Class 2 groups F&G, constant torque 1000:1 rated 1/2 hp 1800 rpm max
Height 63” / 159.9 cm
Width 18” / 457 mm
Depth 29” / 609 mm
Height 63”/1599 mm

Direct Drive Pump (DDP)

Product Enquiries